mectron starjet Gebrauchs- Und Wartungsanleitung Seite 27

Screw the cap of the powder container
back on;
CAUTION: Remove any powder
residue from the thread of the cap
before screwing it in.
Grab starjet, slide the ring down and hold
it in this position, insert the selected noz-
zle until it comes into contact, then re-
lease the ring;
Operate the pedal for 8-10 seconds to al-
low any powder residue to flow out from
the handpiece;
7
8
9
USE
8-10 sec
19