mectron starjet Gebrauchs- Und Wartungsanleitung Seite 26

starjet
Grab starjet, slide the ring down and hold
it in this position, extract the nozzle, then
release the ring;
Blow compressed air into the powder
container, on the cap, and in the cavity
of the handpiece connector, so as to re-
move any powder residue;
Connect starjet to the turbine of the den-
tal unit;
Take the supplied brush and brush the
holes on the diffuser in the powder con-
tainer, holding the pedal pressed.
NOTE: When the pedal is pressed, water
will flow out from the diffuser. Beware of
the environment in which this procedure
is performed.
18
3
4
5
6