Select Access Mode - Programming Code 70 - Sygonix 2365006 Bedienungsanleitung

Programming example 1: Lock the keypad after 5 incorrect attempts
(a) (b) (c)
(a) Programming code 60
(b) Set keypad lock to 5 incorrect entries "5"
(c) Save programming (code lock emits two beep tones and the centre LED flashes twice
orange)
Programming example 2: Disable the keypad lock
(a) (b)
(a) Programming code 60
(b) Disable keypad lock "00"
(c) Save programming (code lock emits two beep tones and the centre LED flashes twice
orange)
Entering the superuser code to unlock the keypad:
If the keypad lock is active, you can end it ahead of time with the superuser code so that other
people can operate the code lock and activate the output.
Example: The superuser code was set to "6789":
m) Select access mode - programming code 70
There are two ways for the code lock to recognise a code:
• Manual access mode
After you enter a user code, you have to press the
Each code (master code, user code, superuser code, visitor code) can have 4 to 8 digits; a
different code length is possible.
Choosing codes with different lengths reduces the likelihood of unauthorised people gaining
access by attempting to guess the code.
(c)
Unlocking keypad for output #1
button to confirm your entry.
101