Intended Use - Sygonix 2365006 Bedienungsanleitung

3. Intended use

The product is mainly used to secure access to doors (e.g. an office). Control is possible either
via suitable transponders or numerical codes.
If you hold a programmed transponder in front of the code lock or enter a numerical code stored
in the system, a potential-free changeover contact is activated (for contact load capacity, see
Chapter "Technical data"). This can be used, for example, to control a door opener or an alarm
system.
Up to 1000 users (numerical codes and/or transponders; max 1000 in total) are supported.
Furthermore, 50 visitor codes can be stored, which can be used either as a single-use code or
as a code with a certain time limit.
An integrated door bell button with a potential-free relay contact allows you to control a
compatible doorbell.
The product also features a tamper contact that connects to an alarm system and triggers a siren
when there is an attempt to tamper with the code lock.
The product is designed for operating indoors and outdoors (IP55).
Advanced functions are available via the app "AccessPlus". A free account is necessary to use
this app. It must be created during initial setup of the app. However, the code lock cannot be
programmed with the app. Functions, such as the notification function or similar can be used.
The app can also be used to create up to 10 temporary access codes.
For safety purposes, do not convert and/or modify this product. Using the product for purposes
other than those described above may damage the product. In addition, improper use can cause
hazards such as a short circuit, fire or electric shock. Read the operating instructions carefully
and store them in a safe place. Only make this product available to third parties together with
its operating instructions.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.
Android is a registered trademark of Google LLC.
TM
63