Beeps And Led Indicators - Sygonix 2365006 Bedienungsanleitung

11. Beeps and LED indicators

The three LEDs on the front panel (see illustration in Chapter 6, positions A, B and C) have the
following functions:
Red LED (A) (left)
The LED lights up red when the output for the door opener is blocked (e.g. via the superuser
code or the setting in programming code 56). During the locking pause, the LED flashes.
Orange/red LED (B) (centre)
The LED flashes red when the Wi-Fi module is not functioning properly or when it establishes a
connection to the Wi-Fi router.
The orange LED, together with the internal piezo buzzer, serves as a confirmation or function
indicator. The following signals are given:
State
Program mode is enabled
Button input successful
Code input successful
Code input incorrect
Switch-on delay
Output is activated
In standby mode
Reset to factory settings
Card or code already
stored in the system
Connection between
keypad and decoder failed
Real-time clock stopped
after power failure
Beep tones*
N/A
1x short
2x short
5 short
Continuous short beep tone
1x long **
N/A
N/A
1 long
Continuously, 1x per second
Continuously, 3x quickly
every 5 seconds
Orange LED
LED is steady on
1x short flash
2x short flashes
5x short flashes
Continous short flashing
N/A
1x short flash per second ***
Fast flashing for 2.5 minutes
N/A
N/A
N/A
75