Mounting The Device - Heidolph Hei-TORQUE Expert Betriebsanleitung

Commissioning

Mounting the device

The device has to be mounted by aid of the support rod either to a stand or to a wall
grid.
WARNING
Danger of tipping due to insufficient stability. Risk of injury
and damage to property.
When mounting the overhead stirrer, make sure that the structure
is sufficiently stable. Otherwise, the stand may tip over at any
moment!
➜
➜
➜
➜
➜
The stand must be used and placed on a clean and stable
surface.
Observe the specific assembly instructions for the stand.
Make sure that the quick chuck of the mounted overhead stirrer
points towards an imaginary center line between the large
sections of the stand base bars, see figure:
After assembly, check all screw connections/clamps for
tightness.
69