Power Supply; Mounting The Adaptor - Heidolph Hei-MIX Reax 2 Betriebsanleitung

Commissioning

Power supply

The device is supplied with the necessary mains voltage via a hard-wired mains cable [1].
➜
Before connecting the power supply, make sure that the main switch of the device is in
[0]
OFF position .
➜
Connect the power supply cord to a properly secured power socket.
➜
Before disconnecting the power supply cord, switch off the device.

Mounting the adaptor

The device can be used with the delivered multi-uso adaptor or the with the optionally available
[Adapter 1]. All adaptors are mounted in the same way:
• Insert the square bolt of the adapter [1] into
the driver [2] of the device base (the figre
shows [Adaptor 1]).
• Pull the handle on the counter holder [3] of
the device outwards, insert the round bolt
of the adapter and snap the handle back
into place.
26