Support Rod And Quick Chuck; Mounting The Support Rod; Mounting The Quick Chuck - Heidolph Hei-TORQUE series Betriebsanleitung

Assembly

Support rod and quick chuck



Mounting the support rod

The support rod allows you to attach the
stirrer to a stand or to a wall grid. (see
chapter "Accessories and spare parts,
Accessories").
Scope of delivery:
▪ Support rod
▪ Allen key
On the back of the device you will find a
slot for the support rod.
➜ Push the support rod into the slot on
the back of the device with the notch
facing the front.
➜ Make sure that the notch on the
support rod aligns with the grub screw
in the housing.
➜ Secure the support rod using the Allen
key provided.

Mounting the quick chuck

➜ Remove the impeller, if currently in
place.
➜ Close the quick chuck and push the
safety ring up into the top position.
➜ Slightly loosen the grub screw located
in the orange ring using the Allen key.
➜ Pull the quick chuck down to remove.
➜ When re-mounting, ensure the grub
screw aligns with the recess.
Support rod
Allen key
Grub screw
housing
Notch
Allen key
Safety ring
upper position
Grub screw
Recess for grub
screw
Grub screw
Allen key
45
Notch