Commissioning
Disconnect the power supply cord
➜
Before disconnecting the power supply cord, switch OFF the device (see following
section "Switch the device on/off" on page 71).
➜
Disconnect the mains connection cord from the mains socket-outlet.
➜
Press in the locking lever on the cable coupling and disconnect the power supply
cord from the IEC appliance plug on the back of the device.
Switch the device on/off
To switch on and off, use the main switch on the front of the device.
➜
Press the main switch once until it locks into place.
–
The display is switched on automatically.
–
The welcome screen appears.
–
The main menu opens (Hei-TORQUE Ultimate only).
➜
Press the main switch again to switch off the device.
–
The main switch is released and jumps back to the original position.
71