Operation
➜
The profile runs and stops after running once.
➜
Stop the profile by deactivating it via the menu "Favorites", "Edit"
➜
The "Profile active" icon disappears
Continuous operation
➜
Open the favorite you want to activate.
➜
Select "Edit".
➜
The existing profile is displayed.
➜
Select "Continuous operation"
➜
The "Profile active" icon
at the top of the display.
➜
Return to the main menu.
➜
Start the profile using the slider.
➜
The profile starts running and is repeated indefinitely.
➜
Stop continuous operation using the slider.
➜
Stop the profile by deactivating it via the menu "Favorites", "Edit"
Rotation start time setting
You can set a start time:
For one of your favorites.
For a setting which you have directly entered in the main menu. taking consideration of
the pre-programmed time.
The start time is interpreted as the actual time. To ensure rotation
starts on time it is important that the clock is set correctly.
➜
Activate the profile for one of your favorites or enter the settings in the main menu.
➜
Select the menu item "Start time" in the submenu.
➜
Push the control knob to edit the time.
➜
Set the time for the profile to start.
➜
Push the control knob to confirm the start time.
➜
Press "Activate"
The start time remains active until it is deactivated again by the
operator.
–
The clock icon
–
30 seconds before to automatic start, the whole display starts flashing.
➜
Deactivate the start time by pressing "Deactivate"
using the control knob.
and the "Continuous operation" icon
to activate the start time.
starts flashing in the upper left-hand corner of the display.
88
.
are displayed
.
.