Speed Limit; Torque Limit - Heidolph Hei-TORQUE Expert Betriebsanleitung

Operation

Speed limit

Some samples may only be exposed to low rotation speed. In this menu you can
restrict the speed to avoid accidental changes.
The default setting is the maximum
possible speed.
➜ Select the "Speed limit" menu
item.
➜
Set the required maximum speed
in rpm.
➜ Push the control knob to confirm.
➜
A confirmation is displayed briefly.
➜ Press "Back" to exit the menu.
➜
The speed cannot be set to higher
than this speed limit, regardless of
the gear stage selected.

Torque limit

Fragile impellers might not withstand a load above a certain torque. This setting allows
you to limit the torque accordingly.
➜
Select the "Torque limit" menu
item.
➜ Push the control knob to confirm
"OFF" or the last setting.
➜ Set the required maximum torque
in Ncm using the control knob.
➜
Push the control knob to exit
setting.
➜ Push the control knob again to
confirm by pressing "OK" and save
the setting.
➜
A confirmation is displayed briefly.
➜
If the torque limit is exceeded,
the device will shut down
automatically.
The safety settings are saved and are not lost by switching off the
device.
Speed limit [rpm]
2000
OK
Limit saved!
Torque limit [Ncm]
OFF
OK
Torque limit [Ncm]
290.5
OK
Limit saved!
78