Operation
Warning: Automatic start! Risk of injury! Risk of entangle-
ment!
Rotating items can lead to severe injuries by drawing in long hair,
loose clothing, jewelry or the like.
➜
➜
➜
➜
–
Rotation starts at the pre-programmed time.
Progression graph
If you wish to check the programmed ramps, especially for high viscosity samples and
saved profiles, you can do so by displaying them as a graph while running a profile.
The graph is only displayed when rotation is active.
Hei-TORQUE Ultimate 100 / 200
➜
You have started stirring.
➜
Select the menu "Graph".
Hei-TORQUE Ultimate 400
➜
You have started stirring.
➜
Open the submenu.
➜
Select the menu item "Graph".
➜
A diagram of the current profile is
displayed.
➜
The graph shows the last 3.5
minutes of the profile.
Keep long hair, jewelery or loose clothing away from rotating
parts.
When a start time is activated, place a warning sign close to
the stirrer. Every individual must be aware of the potential risk of
injuries.
As soon as the display starts flashing, keep a safe distance from
the device to avoid contact with any rotating parts.
Deactivate "Start time" as soon as a profile is finished if it does
not need to be repeated.
rpm
89
12:31
Ncm.