Operation
Rotation Hei-TORQUE Ultimate: Additional functions
Safety settings
➜
You have adjusted acceleration to the specific viscosity of the probe in use.
➜
You have set a speed limit, if required.
➜
You have set a torque limit, if required.
(See chapter "Start-up, Safety settings".)
Set rotation time
The time can be adjusted from 1 minutes to 24 hours. Display of the program is accu-
rate to the closest second.
➜
Select "Timer".
➜
Push the control knob.
➜
Set the duration of rotation while
the settings are displayed in
orange.
➜
Start rotation using the slider.
–
The clock symbol
displayed at the top of the
display.
–
The scale below the set time
indicates the remaining time.
–
Regardless of the set time,
stirring can be stopped at any
time using the slider.
Start rotation via favorite
There are two ways to start a saved profile:
Single operation
Continuous
operation
Single operation
➜
Open the favorite you want to activate.
➜
Select "Edit".
➜
The existing profile is displayed.
➜
Select "single operation"
➜
The "Profile active" icon
➜
Return to the main menu.
➜
Start the profile using the slider.
Remaining time
is
▪ The profile runs once on the basis of the set time.
▪ Rotation stops automatically as soon as the program is
finished.
▪ The profile icon is displayed at the top of the display.
▪ The profile runs until the end of the cycle.
▪ Once the cycle is finished, it starts again.
▪ The stirrer continues running until the profile is stopped
manually.
.
is displayed at the top of the display.
Set time
Timer
Timer
Speed
Speed
87