Setting Up The Device; Power Supply; Commissioning - Heidolph Hei-PLATE Mix 20 l Betriebsanleitung

Commissioning

Commissioning

Setting up the device

CAUTION
Risk Of Slipping!
The vibration during operation can cause the device to move over
the mounting surface and/or fall to the ground.
➜
➜
Place the device on a solid level and horizontal surface for use.
➜ Before switching on, make sure that the device is sufficiently stable.
➜ Keep all contact surfaces clean and dry.
➜
Keep a minimum distance of 10 cm between magnetic stirrers and other devices
and structures (devices with heating function only).

Power Supply

Always use the supplied power supply cord provided with the
device! Observe the instructions in section „Electrical safety", page
31.
The device must only be supplied with power from a properly
grounded mains socket-outlet.
The appliance inlet is located under the protective cover on the back of the device
(figure: Hei-PLATE Core. Hei-PLATE Mix 20 l without port for external temperature
sensor!)
➜
Lift the protective cover for connecting the power supply cable by hand. No tools
are required to open the protective cover.
As soon as the device is supplied via the power supply cable, the on/off button lights up
white.
Observe the instructions for the correct positioning of the
device!
36