Gear Stage Setting - Heidolph Hei-TORQUE Expert Betriebsanleitung

Operation

Gear stage setting

Hei-TORQUE Expert 400 and Hei-TORQUE Ultimate 400 only
To ensure constant speed despite fluctuations in viscosity you can choose between two
gear stages.
Speed range:
Gear stage I : 10 U/min – 400 U/min
Gear stage II : 20 U/min – 2.000 U/min
The gear stage can only be changed if the device is not running.
➜
Stirring is switched off.
➜
Touch the gear stage key on the
control panel.
➜
The current gear stage is
displayed on the control panel.
➜ The speed range is automatically
adjusted to the lowest speed.
Hei-TORQUE Ultimate 400
If you select a favorite to start a profile the gear stage will be
switched automatically.
If you save more than one favorite in succession the software keeps
the gear stage of the most recent profile in memory.
Always delete the profile in the "Edit Profile" menu before editing a
profile with a different gear stage for a new favorite.
Hei-TORQUE
Expert 400
Control key gear stage
83
Hei-TORQUE Ultimate
400