Changing The Prosthesis Setting Using The Cockpit App; Overview Of Adjustment Parameters In Basic Mode - Ottobock 1B1-2 Gebrauchsanweisung

• It is not possible to change prosthesis settings nor to switch to a different mode while the
prosthesis battery is being charged. Only the status of the prosthesis can be called up.
Instead of the
pit app.
• The O&P professional's setting is located in the middle of the scale. After making adjust­
ments, this setting can be restored by tapping the "Standard" button in the Cockpit app.
• Prosthesis settings should be optimised using the adjustment software. The Cockpit app is
not intended for use by the O&P professional to set up the prosthesis. The everyday behaviour
of the prosthesis can be changed to a certain extent using the app (e.g. while becoming
accustomed to the prosthesis). The O&P professional can use the adjustment software to
trace these changes at the next appointment.
• If the settings of a MyMode are to be modified, one must first switch to this MyMode.

8.4.1 Changing the prosthesis setting using the cockpit app

6
Product
MyModes
Functions
Heel Height
Settings
Status
General
Manage components
Imprint/Info

8.4.2 Overview of adjustment parameters in basic mode

The parameters in basic mode describe the dynamic behaviour of the prosthesis in a normal gait
cycle. These parameters act as basic settings for automatically adjusting the damping behaviour
to the current motion situation (e.g. ramps, slow walking speed, etc.).
The following parameters can be modified:
Parameter
Pitch
Volume
symbol, the symbol appears in the bottom row of the screen in the cock­
1) Once the component is connected and in the desired mode,
tap the symbol in the main menu.
→ The navigation menu opens.
2) Tap the "Settings" menu option.
change
→ A list appears with the parameters for the currently
2. Golf
3) Change the setting of the desired parameter by tapping the
"<", ">" symbols.
INFORMATION: The O&P professional's setting is
marked and, after the setting has been changed, can be
restored by tapping the "Standard" button.
Adjustment
software
range
1000 Hz–
4000 Hz
0–4
selected mode.
Setting Meaning
range, app
1000 Hz– Pitch (frequency) of beep signal for
4000 Hz confirmation tones
0–4 Volume of beep signal for confirma­
tion tones (e.g. when checking the
charge level, switching MyModes).
The "0" setting deactivates the aud­
ible feedback signals. However, warn­
71