Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
that are moved forward, when walking down stairs and ramps, and standing on surfaces that are
sloping downwards. The maximum heel height in the section "Technical data" must therefore be
taken into account (see Page 76).
8.1.1 Setting heel height using motion pattern
1) Put on shoes with the new heel height.
2) Stretch out foot with the prosthetic foot sideways.
3) Swing the foot to the side three times.
→ A beep signal will sound to confirm that the motion pattern has been recognised.
4) Put feet at the same level and make sure the heel and toes are resting on the ground surface.
5) Distribute weight on feet evenly.
→ A confirmation signal will sound to indicate that the new heel height was successfully stored.
INFORMATION: If there is no feedback (e.g. beep signal), this indicates that the new
heel height could not be stored. Repeat the heel height measurement.
8.1.2 Setting the heel height with the cockpit app
Product
MyModes
Functions
Heel Height
Settings
Status
General
Manage components
Imprint/Info
8.2 Movement patterns in basic mode (mode 1)
8.2.1 Standing
The intuitive stance function recognises any situation where the prosthesis is
kept still while standing. The prosthesis prevents tipping forward, stabilising
the user.
During rollover to the front or when the prosthesis is lifted off the floor, the
prosthesis leaves the intuitive stance function automatically and switches back
to the walking function.
When coming to a stop while walking, the leg must be set under the body and
extended or weight has to be placed on the heel.
The relief function can be used when standing (see Page 67).
64
1) Once the component is connected and in the desired mode,
tap the symbol in the main menu.
→ The navigation menu opens.
2) Tap the "Heel Height" menu option.
change
3) Follow the on-screen instructions.
2. Golf
4) Tap the "Set the heel height" option.
5) Follow the subsequent instructions on the screen.
Werbung
Kapitel
Inhaltsverzeichnis
