Changing The Prosthesis Setting Using The Cockpit App; Overview Of Adjustment Parameters In Basic Mode - Ottobock C-Leg 3C98-3 Gebrauchsanweisung

8.2.1 Changing the prosthesis setting using the cockpit app

Product
MyModes
Functions
Settings
Status
General
Manage components
Imprint/Info

8.2.2 Overview of adjustment parameters in basic mode

The parameters in basic mode describe the dynamic behaviour of the prosthesis in a normal gait
cycle. These parameters act as basic settings for automatically adjusting the damping behaviour
to the current motion situation (e.g. ramps, slow walking speed, etc.).
The stance function and/or the sitting function can also be activated/deactivated. Further informa­
tion on the stance function (see Page 66). Further information on the sitting function (see
Page 67).
The following parameters can be modified:
Parameter
Resistance
Stance function
Sitting function
70
1) Once the component is connected and in the desired mode,
tap the symbol in the main menu.
→ The navigation menu opens.
2) Tap the menu entry "Settings".
change
→ A list appears with the parameters for the currently
2. Golf
3) Change the setting of the desired parameter by tapping the
"<", ">" symbols.
INFORMATION: The prosthetist's setting is marked
and, after the setting has been changed, can be
restored by tapping the "Standard" button.
Adjustment
software
range
120 to 180
selected mode.
Setting Meaning
range, app
+/- 10 of the Resistance against flexion e.g. when
configured walking down stairs or when sitting
value down
0/Off - deactiv­ Activation/deactivation of the stance
ated function. This function needs to be
1/On - activ­ enabled in the adjustment software.
ated
0/Off - deactiv­ Activation/deactivation of the sitting
ated function. This function needs to be
1/On - activ­ enabled in the adjustment software.
ated