Hydraulic - probst HVZ-GENIUS-II Betriebsanleitung

Maintenance and care
Grease all bolts and movable parts 1x per week.
7.1.2

Hydraulic

Service interval
First inspection after
25 operating hours
All 50 operating hours
5140.0042
Maintenance work
•
Control and tighten all hydraulic thread joints and connection.
(The implementation is only allowed by an expert).
•
Tighten all hydraulic connections.
•
Check the hydraulic system for leaks.
•
Check the hydraulic oil filter, clean it if necessary (if available).
•
Check the hydraulic oil and replace it in accordance to the manufacturer information
(recommended hydraulic oil: HLP 46 according to DIN 51524 – 51535).
•
Check the hydraulic hoses for breaks and abrasion.
Only specified types of oil may be used!
V1
42 / 45
GB