Risk of injury from moving parts!
Moving parts (such as the rotating brushes or oscillating cloth holder) could cause
Always switch the device off before all retrofitting, cleaning and maintenance
Disconnect the accessory head from the device before performing retrofitting,
cleaning or maintenance work on the accessory head.
Stay clear of the moving parts.
Never reach into the rotating components.
6.10 After use
1. Store your DuoClean with the tank inside and the cloth holder.
2. Before doing so, empty the tank and take off the cleaning cloth as
described in the chapters
Replacing the cleaning cloth
Cleaning the cleaning cloths
1. Wash dirty cleaning cloths in the washing machine at 60 °C
without fabric softener. The cloths must never be washed with
chlorine bleaching agents.
2. The cleaning cloths can be tumble-dried on a low setting.
Spare parts and consumables
We recommend you take advantage of our reorder options for
original care products and original consumables in good time. For
more information on the reorder options, see the chapter
7.2 Checking and cleaning the sealing lip
7.2.1 Removing the sealing lip frames
In order to be able to clean the sealing lips thoroughly, the frames
can be removed from the Kobold SPB100 DuoClean.
Removing, filling and inserting the tank