Operation; Attaching The Accessory Head; Setting And Releasing The Standby Position - Vorwerk kobold SPB100 Gebrauchsanleitung

1
2
1
2
50
6

Operation

6.1 Attaching the accessory head

• Connect the attachment socket (1) of the cordless vacuum
cleaner to the pivot on the DuoClean (2).
ð Make sure you hear the attachment socket click into the pivot.
6.2 Setting and releasing the standby
position
1. Turn the cordless vacuum cleaner at the pivot so that both the
cordless vacuum cleaner and the DuoClean are centred.
3
2. Push the cordless vacuum cleaner forwards (1) over the
DuoClean.
ð The cordless vacuum cleaner clicks into the standby position.
3. To release the standby position, push the cordless vacuum
cleaner a little further forwards (1) until you hear a click (2).
ð The cordless vacuum cleaner is now no longer in the standby
position.
4. Put the cordless vacuum cleaner in the power setting in the usual
way (3).