Dry Mode; Single Application Of Moisture To A Dry Cloth; Changing Moisture Settings - Vorwerk kobold SPB100 Gebrauchsanleitung

1
54

6.6.1 Dry mode

After you have switched on the cordless vacuum cleaner and the
DuoClean, the DuoClean initially runs in dry mode. No LED waves are
lit.

6.6.2 Single application of moisture to a dry cloth

• Press the green function key (1) at the left on the rear of the
DuoClean for about five seconds to start the process of fully
moistening the cloth.

6.6.3 Changing moisture settings

1. Press the green function key (1) at the left on the rear of the
DuoClean to start the automatic application of moisture to the
cloth.
2. Press the green function key again (1) to toggle between the
moisture settings.
Note: If the cleaning cloth is too dry, increase the moisture setting using the
green function key (1) on the DuoClean.