Reinigung Metzgerschnitteinsatz; Assembly After Cleaning - Graef Master 2720 Betriebsanleitung

7.3.4

Reinigung Metzgerschnitteinsatz

For cleaning, remove the butcher's cutting insert. Use a dish-washing brush for cleaning in a washbasin
as described in chapter 7.1.0
7.4.0

Assembly after cleaning

• Put on the blade cover plate and screw the knob on the motor body into the blade cover plate.
• Put in the last slice clamp plate into the last slice clamp.
• Insert the slide into the slide foot.
• Press the slide downwards with both hands.
• Tighten the knob on the base of the table.
• Insert he blade scraper from above into the dovetail guide and press it down carefully.
8.0 Maintenance
 )TGCUKPI  .WDTKECVKPI
Warning!
4QVCVKPI DNCFG /C[ UGXGT PIGTU
Turn off the machine before the maintenance.
Important!
Use only oils for lubrication which we released.
Lubricate the following positions with the Graef-Service-oil-H1 with 1 to 2 drips acc. to requirement, but
at least once a week.
Apply oil according to demand:
r 6JG NCUV UNKEG FGXKEG TQF CNYC[U KV KU FKH EWNV VQ RWUJ VJG RCTVU  CHVGT ENGCPKPI
62