Cleaning Schedule - Graef Master 2720 Betriebsanleitung

7.1.3

Cleaning schedule

%QPUKFGT VJG QRGTCVKPI UEJGFWNG
Working steps
1. Preparatory
measures
2. Dismounting of the
removable parts
3. Rough cleaning
Manual
4. Cleaning
4. Disinfection
additional measure
5. Rinsing
6. Checking
7. Drying
8. Care
9. Assembly
10. Safety measures
The indications concern a single shift operation.
The safety and product data sheet, which are delivered with detergent and disinfectant, must be
observed.
Detergent Process
Close cutting thickness
adjustment. Pull the
mains plug
acc. to
manual
Remove the
product remainders
Plastic scraper
2% e.g. after thorough rinsing
„P3-Steril" with water (max.40°)
water reaction time abt.
20 min.
e.g. manual spray
„P3-alcodes" Do not exceed exposure
time acc. to
product data sheet
drinking water Temperature max. 50°
visually for optical
cleanliness
rub dry
air-dry
Food oils with H1 apply by spraying and
approval e.g. P3 rubbing
service oil
in reverse sequence to
disassembly (manual)
cover machine when cleaning surrounding area with spray guns.
Cleaning unit
Plastic scraper
also in case of removab-
le parts.
brush, tub
cleaning cloth,
hand spray device
Disposable cleaning
cloth, manual spray
device
disposable cleaning
cloth
hand spray device
water hose
disposable cleaning
cloth
disposable cleaning
cloth
58
Note
start directly
all dismounted and
ZGF OCEJKPG RCTVU
additional
protection.
spray distance
abt.30 cm
other machine parts
removed parts
removed parts
machine,
dismounted parts
place away from
each other
rinse parts in contact
with product to be
cut prior to work
staff needs clean and
disinfected hands