Main Menu; Commands; Mowing Plan; Active Times - Viking MI 422 Gebrauchsanleitung

10.4 Main menu

The main menu is displayed,
– by pressing the OK button
( 10.2) the status screen is quit,
– when the Back button is pressed in the
second menu level.

1. Commands (

10.5)
Lock iMow
Switch automatic mowing on and off
Drive to docking station
Starting mowing
Start time-delayed mowing
Skip next active time
Edge mowing

2. Mowing plan (

10.6)

Active times

Mowing duration

3. Information ( 10.9)
Messages
Events
iMow status
Lawn status

4. Settings (

10.10)
iMow
Installation
Safety
Service
Dealer area
110
10.5 Commands
Select the required command using the
control pad and execute by pressing OK.
1. Lock iMow
2. Switch on automatic mowing/Switch off
automatic mowing
3. Drive to docking station
4. Start mowing
5. Start time-delayed mowing
6. Skip next active time
7. Edge mowing
1. Lock iMow:
Activate disabling device.
Press the illustrated button
combination to unlock. (
2. Switch automatic mowing
on/
off:
When automatic mowing is
switched on, the text "Automatic switched
on" appears in the status screen and the
automatic symbol is displayed next to the
battery symbol in the menus. The robotic
mower mows the mowing area fully
automatically.
When automatic mowing is switched
off, the text "Automatic switched off"
appears in the status screen and the active
times are shown as inactive (greyed out) in
the mowing plan. The mowing area is not
mown automatically. Mowing operations
can be initiated via the commands "Start
mowing" or "Start time-delayed mowing".
3. Drive to docking station:
The robotic mower travels back
to the docking station and
charges the battery. If automatic
mowing is switched on, the robotic mower
will mow the mowing area again at the next
possible active time.
4. Start mowing:
The robotic mower starts the
mowing operation automatically
following activation. The end of
the mowing operation must be specified.
If a secondary area was installed, after
pressing the OK button it is necessary to
define whether mowing is taking place on
a secondary area or on the main area.
( 10.14)
The standard setting for the duration of the
mowing operation can be modified under
"Mowing time" in the machine settings.
( 10.10)
5.2)
5. Start time-delayed mowing:
The robotic mower starts the
mowing operation automatically,
but with a time delay, following
activation. The start and end times of the
mowing operation must be specified.
If a secondary area was installed, after
pressing the OK button it is necessary to
define whether mowing is taking place on
a secondary area or on the main area.
If an external docking station with a
corridor was installed, bring the
robotic mower to the mowing area
before activation of the command
"Start mowing".
0478 131 9923 B - EN