Imow - Machine Settings; Setting The Rain Sensor - Viking iMow MI 632 Gebrauchsanleitung

11.10 Settings
1. iMow:
Adapt machine settings
( 11.11)
2. Installation:
Adapt and test the installation
( 11.14)
3. Safety:
Adapt the safety settings (
4. Service:
Maintenance and service (
5. Dealer area:
This menu is protected by the
dealer code. Your VIKING
specialist dealer performs a variety of
maintenance and service operations with
the aid of this menu.
11.11 iMow – machine settings
1. Rain sensor:
The rain sensor can be set so that
mowing is interrupted or does not
start when it is raining.
● Setting the rain sensor (
0478 131 9931 B - EN
2. Mowing time:
Set the standard for the duration of a
mowing operation after activation of
the command "Start mowing". (
3. Delay:
Set the standard for the delay
following activation of the command
"Start time-delayed mowing". (
4. Status screen:
Select the information that is to
appear in the status screen.
( 11.13)
● Setting the status screen (
5. Time:
Set the current time.
The set time must correspond to the
actual time in order to prevent inadvertent
mowing by the robotic mower.
MI 632 C, MI 632 PC:
The time can also be set using the
11.16)
app. (
6. Date:
11.17)
Set the current date.
The set date must correspond to the
actual calendar date in order to prevent
inadvertent operation of the robotic
mower.
MI 632 C, MI 632 PC:
The date can also be set using the
app. (
7. Date format:
Set the required date format.
8. Track offset:
The robotic mower travels along the
perimeter wire at a 6 cm offset from
the wire as standard. With this offset,
11.12)
optimum docking is ensured. The iRuler is
also designed with a track offset of 6 cm.
11.5)
11.5)
11.13)
10.)
10.)
VIKING recommends that the
standard setting of 6 cm not be
changed.
● Only if necessary, open the selection
window with OK and set the required
value (3 cm to 9 cm).
9. Language:
Set the required display language.
The language selected during initial
installation is set as the default.
10. Contrast:
The display contrast can be
adjusted as required.
11. Energy mode:
(MI 632 C, MI 632 PC):
In GPRS (default setting), the
robotic mower is connected to the Internet
at all times and can be reached using the
app. ( 10.)
In ECO, radio communication is
deactivated during rest periods to reduce
energy consumption; the robotic mower
cannot be reached using the app. The
most recent available data is shown in the
app.

11.12 Setting the rain sensor

In order to set the 5-stage
sensor, press the control pad to
the left or right. The current
value is displayed in the "Settings" menu
by means of a line diagram.
The sensitivity of the rain sensor can be
adapted to the local conditions and
requirements. In particular, it is possible to
adjust how long the robotic mower waits
for the mowing area to dry following rain.
125