Safety Instructions - Assa Abloy OneSystem N7 Serie Montageanleitung

!

Safety instructions

Safety instructions
Warning!
Life-threatening danger and risk of injury from changes to safety features: The
safety features of this product are an essential requirement for its conformity
with EN 179 and EN 1125.
· No changes which are not described in this manual may be undertaken.
· Only suitable accessories recommended by ASSA ABLOY may be used ("Acces-
sories", page 104).
Life-threatening danger and risk of injury due to damage: A damaged lock is a
safety risk and must not be put into operation. Check the packaging and the lock
for damage. Damaged cables and connector assemblies must not be used either.
Unsuitable doors may result in life-threatening danger, risk of injury and
material damage, as well as reduced intrusion protection: Only approved and
technically correct doors are suitable for installation of lock. The door must be in-
stalled properly and may not have any signs of warpage. Door operating elements
may not impede each other.
Diminished fire protection function may result in life-threatening danger, risk
of injury and material damage: Fire doors prevent fire from spreading and are
tested as a complete unit with accessories:
· regulations established by inspection authorities must be complied with,
· the certification of the fire door must match the lock,
· consult the door manufacturer if the lock is to be replaced and a different model
is to be used or a lock is to be retrofitted,
· the door manufacturer's specifications must be observed,
· locks with latch locking must not be used on doors with smoke or fire door
approval
· the installed lock must be the appropriate size.
Broken glass doors may result in life-threatening danger, risk of injury and
material damage: Glass doors or glass parts on doors must be made of safety
glass or composite safety glass.
EN 59