Assa Abloy OneSystem N7 Serie Montageanleitung Seite 61

Important!
A
Property damage caused by work on the door leaf: The lock must be removed
for all work on the door leaf, such as drilling or cutting.
Impaired function due to incorrect rebate gap: The rebate gap (Fig. 1, page 57)
must be suitably adjusted ("Technical data", page 96).
Using an unsuitable striking plate can cause material damage: The striking
plate must be selected ("Accessories", page 104) and mounted so that it always
acts as the stop face and sliding surface for the latch bolt and the control latch.
Improper handling during transport can cause material damage: The door leaf
must not be lifted or carried by the door handles.
Damage caused by opening: Opening the lock will damage it and void the war-
ranty ("Warranty", page 95).
Damage caused by painting over product: Do not paint the lock or striking
plate, or coat either with other substances.
Comply with EMC Directive: For reasons of electromagnetic compatibility,
individual cables may not be connected in parallel in order to maintain a larger
conductor cross-section. Always use individual cables with a suitable cross-sec-
tion surface.
Safety instructions EN 61