Assa Abloy OneSystem N7 Serie Montageanleitung Seite 80

A
EN
80
Mounting the face plate extension on multi-point locking
1 Unlock the lock completely.
2 Hook the rail carefully into the sliding top on the additional box of the face
plate extension (Fig. 10).
3 Move the rail carefully in a straight line to the face plate in the final position.
4 Hook the extension carefully into the sliding top on the additional box of the
multi-point locking (Fig. 10).
5 Move the face plate extension carefully in a straight line to the face plate in
the final position.
 The face plate extension has been mechanically connected with the multi-
point locking.
6 Check for correct function.
 If it is working correctly, the lock can be mounted.
Important!
Material damage due to inappropriate lifting: While the lock and face plate
extension are not fully mounted, there is a risk that the face plate extension may
snap during lifting. During lifting, support the face plate extension so that it is
always in a line with the face plate.
Mounting