Assa Abloy OneSystem N7 Serie Montageanleitung Seite 97

I
Technical data
Property
Material
· Lock case
· Latch bolt
· Face plate
Operating temperature
Corrosion resistance
Operating voltage
Power consumption
· at 12 V DC
· at 24 V DC
Operating mode
adjustable
Sensors for monitoring
· Handle inside
· Handle outside
· Outside handle engaged
· Bolt monitoring
· Locking cylinder
monitoring
Note!
Depending on the mounted U-shaped faceplate or multi-point lock faceplate
variant, the bolt and latches may protrude: When using U-shaped faceplate or
multi-point lock faceplate variants with material thicknesses below 3 mm, the
retracted latch bolts and tilt latches can and should protrude by 1 mm.
Characteristic
Steel – galvanised
Steel – nickel-plated
Stainless steel
–20°C – +60°C (EN 179)
–20°C – +80°C (EN 12209)
high corrosion resistance
12 – 24 V DC +/–15 %
120 mA
80 mA
only with panic function C with handle control:
fail locked/ fail unlocked
with panic functions B / C:
>5° actuated
>5° actuated
on / off
unlocked / locked
Yes
with panic function E:
>5° actuated
–
–
unlocked / locked
Yes
EN 97