Assa Abloy OneSystem N7 Serie Montageanleitung Seite 66

Tab. 3 :
Classification key
in accordance with
EN 12209
EN
66
EN 12209
The properties of locks are described by the eleven-digit classification key
according to EN 12209.
The classification key for the
N7XXX OneSystem SBP lock:
Tab. 3 explains the classification key.
Class Meaning
3 For use by the public, where there is little incentive to take care and
there is a high likelihood of misuse, such as in doors in public buildings.
S 200,000 test cycles with a latch load of 50 N
6 Door mass 300 kg, max. 25 N closing force,
see „EN 1125 – Panic function B, C and E" and „EN 179 – Panic function
B, C and E", page 64ff, as use in accordance with these standards
reduces the maximum door mass
0 Not permitted for use on fire and smoke protection doors
1 Suitable for use on fire doors/smoke protection doors
0 No safety requirements
see „EN 1125 – Panic function B, C and E" and „EN 179 – Panic function
B, C and E", page 64ff, as use in accordance with these standards
demands higher requirements
F High corrosion resistance, at –20 °C to +80 °C
6 Very high protective effect and no drilling resistance.
H Mortise lock
B Cylinder lock, automatic locking
2 For actuation of a door handle without holding spring
0 no requirement for key identification
0
3 S 6 0 F
1
6 H B 2 0
Safety instructions