Information Regarding Ul; Short Circuit Current Rating - SEW-Eurodrive MOVIDRIVE modular Produkthandbuch

Installation
8

Information regarding UL

8.15 Information regarding UL
8.15.1 Field Wiring Power Terminals
MDP90A-...-
0100 (size 1)
0100 (size 1A)
0250
0500
0750
1100
MDA90A-...-
0020 – 0120
0160 – 0240
0320 – 0480
0640 – 1800
MDD90A-...-
0020 – 0040
0020 – 0080
MDP90A-1100
MDA90A-1400 – 1800
8.15.2

Short Circuit Current Rating

408
Produkthandbuch – MOVIDRIVE
HINWEIS
Das folgende Kapitel wird unabhängig von der Sprache dieser Dokumentation auf-
grund von UL-Anforderungen immer in englischer Sprache abgedruckt.
• Use 75 °C solid or stranded copper wire only sized at 14 AWG minimum. Suitable
for 1 wire per terminal.
• For double axis modules use wire size 12 – 14 AWG.
• Tighten terminals to in-lbs (Nm) as follows
Line connection
X1 4.4 – 5.3 (0.5 – 0.6)
X1 4.4 – 5.3 (0.5 – 0.6)
X1 26.6 – 35.4 (3.0 – 4.0)
X1 159.3 – 194.7 (18.0 – 22.0)
X1 159.3 – 194.7 (18.0 – 22.0)
X1 159.3 – 194.7 (18.0 – 22.0)
Motor connection
X2 4.4 – 5.3 (0.5 – 0.6)
X2 13.3 – 15.0 (1.5 – 1.7)
X2 26.6 – 35.4 (3.0 – 4.0)
X2 159.3 – 194.7 (18.0 – 22.0)
Motor connection
X2 4.4 – 5.3 (0.5 – 0.6)
X2 13.3 – 15.0 (1.5 – 1.7)
DC link connection
X4 26.6 – 35.4 (3.0 – 4.0)
DC link connection
X4B 97.4 – 106.2 (11.0 – 12.0)
X4 97.4 – 106.2 (11.0 – 12.0)
Suitable for use on a circuit capable of delivering not more than
• 5000/10000/65000 rms symmetrical amperes when protected by fuses and circuit
breakers as described in the tables below.
Max. voltage is limited to 500 V.
®
modular
Tightening torque in-lbs (Nm)
Power supply module
Braking resistor terminals
X3
X3
X3
X3
X3
X3
Single-axis module
-
-
-
X3
Double-axis module
-
-
All modules (exception below)
-
-
4.4 – 5.3 (0.5 – 0.6)
4.4 – 5.3 (0.5 – 0.6)
26.6 – 35.4 (3.0 – 4.0)
26.6 – 35.4 (3.0 – 4.0)
26.6 – 35.4 (3.0 – 4.0)
97.4 – 106.2 (11.0 – 12.0)
-
-
-
-
159.3 – 194.7 (18.0 – 22.0)
-
-
-
PE connection
26.6 – 35.4 (3.0 – 4.0)
-
-