Testing The Torch Neck - Fronius Robacta series Bedienungsanleitung

Testing the Torch
Neck
1
2
3
76
(1)
(2)
Place the torch neck in the torch neck holder (1) on the base plate
Secure the torch neck using two union nuts
Check the position of the contact tips by pressing on the dowel pin (2)
- The torch neck is okay if the test probes (3) fit perfectly into the wire outlet open-
ings on the contact tips.
- In the case of dimension deviations, please send the torch neck to Fronius for re-
pairs.
(3)