Foreword; Basic Safety Instructions - CITO RSP System 2.0 Bedienungsanleitung

Foreword

With the RSP System 2.0 by CITO you expand your
printing press simply and at a reasonable cost to a
real finishing system.
Creasing, cutting, kiss cutting and perforating without
an extra machine, without additional personnel,
without time-consuming manufacturing processes.

Basic safety instructions

• First read the operating manual before using the RSP
System 2.0 on the printing press.
• Make sure that only staff trained by CITO are
working with the RSP System 2.0.
• Keep the operating manual in such a way that it is
always available for the operators of the machine.
Special attention to be paid when using the
RSP System 2.0:
• Do not mount the system above cylinder bearer level.
• Check protective impression cylinder jackets for
adhesiveness.
• Check printstart.
• The RSP system 2.0 must only be operated – even
during inching of the press – with the locking hinge
closed!
• Do not use the automatic washing devices.
• Switch off coating rollers.
• Remove printing plate.
• Remove screening roller/varnishing roller in the
coating unit.
• Set distance for the first pull to 0.35 mm between
blanket cylinder and impression cylinder.
Cleansing agents, solvents:
To clean the base plate only use blanket wash.
For removal of residues of glue on the millimetre grid
sheet only use blanket wash.
Actuality
The descriptions contained in these operating instructions
correspond to the standard of the RSP System 2.0 at the
date of publication of these operating instructions.
We reserve the right to make changes which serve
technical progress at any time. In case of any uncertainties
please refer to CITO-SYSTEM GmbH.
Note of protection
Material parts of our RSP System 2.0 are protected in
Germany and abroad by copyright or patents pending,
patents and patented design.
Manufacturer's address:
CITO-SYSTEM GmbH
Haimendorfer Straße 37+46
90571 Schwaig bei Nürnberg/Germany
Phone +49 911 95885-0
Fax +49 911 95885-500
info@cito.de
www.cito.de
49
Operating Manual