Back; Seat Angle Adjustment - Otto Bock skippi Bedienungsanleitung

9.1 Back

The back can be adjusted to four different angle positions
by pulling the release strap which is located at the base of
the back. Once the back is in the desired position, release
the strap to engage the locks (Fig. 15).

9.2 Seat Angle Adjustment

The Skippi offers 3 different seat angle settings (-6°,
3° and 12°). To change the position, swing away the
Sek.uring bow of the tube quick lock pin and pull out the
pin (Fig. 16).
Note!
Ensure after every seat angle adjustment that the
Sek.uring bow of the pin has been closed!
Note!
During seat angle adjustments the user must not
sit in the wheelchair.
68
Fig. 15
Fig. 16