Notes On Ce Identification; Proper Use - MICRO-EPSILON capaNCDT 6100 Betriebsanleitung

Safety
1.3
The following applies to the capaNCDT 6100: EMC regulation 2004/108/EC
Products which carry the CE mark satisfy the requirements of the EMC regulation 2004/108/EC 'Electromag-
netic Compatibility' and the European standards (EN) listed therein. The EC declaration of conformity is kept
available according to EC regulation, article 10 by the authorities responsible at
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Straße 15
94496 Ortenburg
The system is designed for use in industry and satisfies the requirements of the standards:
-
-
The system fulfills the specification of the EMC requirements, if the instructions in the operating manual are
followed.
1.4
-
-
-
-
capaNCDT 6100

Notes on CE Identification

DIN EN 61326-1: 2006-10
DIN 61326-2-3: 2007-05

Proper Use

The capaNCDT 6100 measuring system is designed for use in industrial areas. It is used for
displacement, distance and movement measurement.
ƒ
position measuring of parts or machine components.
ƒ
The system may only be operated within the limits specified in the technical data
Use the system only in such a way that in case of malfunction or failure personnel or machinery are not
endangered.
Take additional precautions for safety and damage prevention for safety-related applications.
, see Chap. 2.3.
Page 36