Temporary Shutdown; Change Of Location; Technical Data; Dimensions And Weights - Bosch WBE 4510 Originalbetriebsanleitung

15. Decommissioning
15.1

Temporary shutdown

In the event of lengthy periods of non-use:
€
Unplug the electrical connection.
€
Disconnect the pneumatic connection.
€
Thoroughly clean tools and accessories and treat
with a thin film of oil for example.
15.2

Change of location

€
If the WBE 4510 is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
€
The WBE 4510 is only ever to be transported in the
original or equivalent packaging.
€
Unplug the electrical connection.
€
Heed the notes on initial commissioning.
€
Disconnect the pneumatic connection.
€
Use the four bolts to secure the WBE 4510 on the
pallet again.
15.3

Disposal and scrapping

15.3.1 Substances hazardous to water
!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
15.3.2 WBE 4510 and accessories
1. Disconnect the WBE 4510 from the mains and de-
tach the power cord.
2. Dismantle the WBE 4510 and sort out and dispose
of the different materials in accordance with the ap-
plicable regulations.
The WBE 4510 is subject to the European
directive 2002/96/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
€
Make use of the local return and collection
systems for disposal.
€
Proper disposal of the WBE 4510 prevents
environmental pollution and possible health
hazards.
Robert Bosch GmbH
Decommissioning | WBE 4510 | 63

16. Technical data

16.1 WBE 4510
Function
Balancing speed
Measurement resolution
Noise level
Power
Voltage
(depending on version ordered)
Degree of protection
16.2

Dimensions and weights

Function
WBE 4510 (H x W x D) max.
Weight
16.3

Operating range

Function
Rim width
Rim diameter
Maximum wheel diameter
Maximum wheel weight
en
Specification
190 U/min 50 Hz /
190 U/min 60 Hz
1/5 g (0.01/0.25 oz)
< 70 dB
0,7 kW
115 V 1~ (60 Hz) /
115 V 1~ (50 Hz) /
230 V 1~ (50 Hz) /
IP 22
Specification
2000 x 2030 x 1000 mm
355 kg
min – max
1" – 20"
10" – 26"
1050 mm
70 kg
|
1 695 655 163 2010-07-17