37 8.4.2 User-Defi Ned Settings - Bosch WBE 4510 Originalbetriebsanleitung

en 48 | WBE 4510 | Program structure
Menu bar
Symbol Explanation
Flange calibration
(refer to Section 14.4.2)
Calibration with "go" wheel
(refer to Section 14.4.4)
Calibration of electronic vernier calipers
(refer to Section 14.4.3)
Laser calibration (can only be performed by Service
engineer).
8.4.2 User-defined settings
Navigation menu
Symbol Explanation
Displays menu bar 1:
"WBE 4510 settings"
Displays menu bar 2:
"Resolution and units"
Displays menu bar 3:
"Personal settings"
Selection of functions in menu bar.
Exit from menu, return to Balancing menu.
|
1 695 655 163 2010-07-17
Menu bar 1 - WBE 4510 settings
Symbol Explanation
Activates or deactivates automatic measurement of
radial run-out after each unbalance measurement.
Activates or deactivates the laser (rim width and
tire geometry measurement).
Activates or deactivates the vernier caliper.
Selection of position transfer by way of time
or pedal.
Positioning of adhesive weight (electronic vernier
caliper, manual vernier caliper (3, 6 or 12 o'clock).
Activates or deactivates the printer.
Menu bar 2 - Resolution and units
Symbol Explanation
Selection of weight display in grams (g) or ounces
(oz).
Selection of weight resolution
1 g / 0.05 oz or 5 g / 0.25 oz.
Residual value suppression:
Entry of weight value below which the
value "0" is to be displayed.
Menu bar 3 - Personal settings
Symbol Explanation
Language selection.
No function.
Activates or deactivates
the screen saver.
Activates or deactivates
acoustic acknowledgement signal.
Input of workshop address.
Robert Bosch GmbH