36 8.3 Balancing Menu; 36 8.3.1 Standard Balancing - Bosch WBE 4510 Originalbetriebsanleitung

en 46 | WBE 4510 | Program structure
Menu bar 2 - Manual rim data input
Symbol Designation Explanation
Rim Input of distance between WBE 4510
distance and rim by way of + / – keys.
Rim Input of rim width
width by way of + / – keys.
Rim diameter Input of rim diameter
by way of + / – keys.
Switching of Selection of display in mm or inches
units for rim width and rim diameter.
The rim distance is always displayed
in mm.
Manual mea- Re-measurement of rim width with
surement of laser.
rim width
User selec- Selection of user 1, 2 or 3. The last
tion settings and rim data selected are as-
signed to the current user and stored.
|
1 695 655 163 2010-07-17
8.3 Balancing menu
8.3.1 Standard balancing
Navigation menu
Symbol Explanation
Movement to other balancing position.
Selection of functions in menu bar.
Call-up of "Rim data" menu.
Exit from menu, return to Start page.
Start of measurement.
Menu bar
Symbol Explanation
Display of the exact, non-rounded unbalance mea-
sured value (refer also to Section 8.4.2).
Call-up of split program (refer to Section 9.3.3).
Call-up of radial run-out, lateral run-out and tire ge-
ometry menu (refer to Section 8.3.2).
Call-up of "Unbalance minimization" program
(refer to Section 10).
Selection of user 1, 2 or 3. The last settings and rim
data selected are assigned to the current user and
stored.
Print menu
Only active if printer has been activated
(refer to Section 8.4.2).
Robert Bosch GmbH