25 6.3 Spare And Wearing Parts; 26 7.1 Place Change; 26 7.2 Temporary Decommissioning - Bosch TCE 4460 Originalbetriebsanleitung

6.3 Spare and wearing parts
Denomination
Mounting tool adhesive tag
Electrical tensionadhesive tag
Bead breaker adhesive tag
Tilting column adhesive tag
Aisles protections for 30" plate
Bead breaker blade screw
Mounting tool
Tool tab protections (5 pieces)
Mounting tool cover
Sliding cover tablet
Bead breaker blade
Front bead breaker support
Rear bead breaker support
Robert Bosch GmbH
7.
7.1
Order code
1 695 100 982
Procedure:
1 695 100 789
1. Disconnect electrical connection.
1 695 100 983
2. Disconnect pneumatic connection.
1 695 100 776
3. Dismantle the column switch and lean it at the side.
1 695 105 251
4. Follow what shown for first start up (see chap. 4.2).
1 695 103 347
5. Fix again the TCE 4460 with its four screws on the
1 695 102 647
pallet (see chap. 4.2).
1 695 101 608
1 695 102 725
i
In case of sale or transfer of TCE 4460, all the docu-
1 695 100 815
ments included in the consignment volume has to be
1 695 100 897
integrally handed over together with the equipment.
1 695 100 643
1 695 100 654
7.2
If the TCE 4460 is going to be stopped for a limited
period of time or if the equipment is not being used
for other reasons, always disconnect the network plug
from its socket!
It is suggested to clean accurately the TCE 4460, also
its tools and accessories, and carry out a protection
treatment (e.g. spraying of a thin oil film).
7.3
€
Disconnect the TCE 4460 from the mains tension
and take off the power supply cable.
€
Oil are water pollution risk fluids and have to be
disposed of in accordance with the rules in force.
€
Disassemble the TCE 4460, order the materials ac-
cording to the category it belongs to and dispose of
them according to the rules in force.
Decommissioning | TCE 4460 | 41
Decommissioning
Place change
Temporary decommissioning
Disposal
TCE 4460 complies to the rules of the Euro-
pean directive 2002/96/CE (directive on the
disposal of electrical and electronic waste).
Electric and electronic devices which are out
of order, together with their cables, accesso-
ries, accumulators and batteries, have to be
disposed of separately from household waste.
€
For disposal of such products, use the
available return and collection systems.
€
The correct disposal of the TCE 4460
makes it possible to avoid environmental
damage and to put at no risk the life of
people.
1 695 105 428
en
|
2010-02-16