Siemens SINUMERIK 840D sl Inbetriebnahmehandbuch Seite 1041

[LinuxBase]
; Keep size of /var/log/messages around this value
; (not followed exactly for performance reasons)
LogfileLimit=102400
; Protocol/Port pairs to open in the firewall
; (e.g., TCP/5900, UDP/514, ...)
;FirewallOpenPorts="TCP/5900 TCP/102"
; If there is only one Ethernet interface, it's used by
; default as an external (company) network. Alternatively,
; usage as automation net (TCU boot support etc.) is possible
; by setting NetworkModel to "automation". (NCU only, Service
; and PCU20A variants!)
;NetworkModel=automation
; DisableSubsystems can be used to skip certain CFSes (= subsystems)
; a list of multiple names (separated by spaces) is possible
; a simple name means all CFSes with this name, an absolute path
; (e.g.,/siemens/sinumerik/nck) exactly this one CFS with
; the special value "ALL", all subsystems can be disabled
;DisableSubsystems=nck
; Directory for OEM netboot files (served by tftp to diskless clients)
NetbootDirectory=/oem/common/netboot
; Properties of local time zone: names, offset, start and end day
; Some examples:
;
;
;
;
;
;
;
;
Betriebssystem NCU (IM7)
Inbetriebnahmehandbuch, 10/2015, 6FC5397-1DP40-5AA3
Europe: WET0WEST,M3.5.0,M10.5.0
CET-1CEST,M3.5.0,M10.5.0
EET-2EEST,M3.5.0,M10.5.0
USA: EST5EDT,M4.1.0,M10.5.0
CST6CDT,M4.1.0,M10.5.0
MST7MDT,M4.1.0,M10.5.0
PST8PDT,M4.1.0,M10.5.0
China: CST-8
System konfigurieren
2.3 Konfigurationsdatei "basesys.ini"
33