Manual Spindle Sleeve Feed With The Fine Feed; Digital Display For Spindle Sleeve Travel - Optimum OPTImill BF 46TC Betriebsanleitung

4.16

Manual spindle sleeve feed with the fine feed


Turn the handle screw.
The spindle sleeve lever moves in
direction of the drilling-milling head
and activates the coupling of the fine
feed.

Turn the spindle sleeve fine feed in
order to move the spindle sleeve.
4.17

Digital display for spindle sleeve travel

Measuring range
Reading precision
Power supply
5
1
2
3
4
Pos.
1 LCD display
2 Shifting mm/inch
3 Performs a value increase in operating mode "S" (Setting)
4 Performs a value decrease in operating mode "S" (Setting)
5 ON/OFF switch
6 Zero position and activation of operation mode "S"
7 Battery bay
8 Display of operation mode "S" and selected unit "mm / inch"
Version 1.1.3 dated 2014-4-8
Handle screw
Fine feed for
spindle sleeve
Img.4-14: Handle screw
0 - 999.99mm
0 - 39.371"inch
0.01mm
0.0004"inch
round cell CR2032 , 3 V 20 x 3,2mm
8
6
7
Designation
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
BF46V | BF46TC GB
Page 91