Liability Claims For Defects / Warranty; Note Regarding Disposal / Options To Reuse - Optimum OPTImill BF 46TC Betriebsanleitung

7.4

Liability claims for defects / warranty

Beside the legal liability claims for defects of the customer towards the seller the manufacturer
of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, does not grant
any further warranties unless they are listed below or had been promised in the frame of a sin-
gle contractual agreement.

The processing of the liability claims or of the warranty is performed as chosen by
OPTIMUM GmbH either directly or through one of its dealers.
Any defective products or components of such products will either be repaired or
replaced by components which are free from defects. The property of replaced prod-
ucts or components passes on to OPTIMUM Maschinen Germany GmbH.

The automatically generated original proof of purchase which shows the date of purchase,
the type of machine and the serial number, if applicable, is the precondition in order to
assert liability or warranty claims. If the original proof of purchase is not presented, we are
not able to perform any services.

Defects resulting of the following circumstances are excluded from liability and warranty
claims:
- Using the product beyond the technical options and proper use, in particular due to over-
straining of the machine.
- Any defects arising by one's own fault due to faulty operations or if the operating manual
is disregarded.
- Inattentive or incorrect handling and use of improper equipment.
- Non-authorized modifications and repairs.
- Insufficient installation and safeguarding of the machine
- Disregarding the installation requirements and conditions of use.
- Atmospheric discharges, overvoltage and lightning strokes as well as chemical influ-
ences.

The following items are as well not subject to the liability or warranty claims:
- Wearing parts and components which are subject to a standard wear as intended such
as e.g. V-belts, ball bearings, illuminants, filters, sealings, etc.
- Non reproducible software errors

Any services which OPTIMUM GmbH or one of its agents performs in order to fulfill in the
frame of an additional guarantee are neither an acceptance of the defects nor an accept-
ance of its obligation to compensate. Such services do neither delay nor interrupt the war-
ranty period.

Place of jurisdiction among traders is Bamberg.

If one of the above mentioned agreements is totally or partially inefficient and/or null, it is
considered as agreed what is closest to the will of the warrantor and which remains in the
framework of the limits of liability and warranty which are predefined by this contract.
7.5

Note regarding disposal / options to reuse:

Please dispose of your device environmentally friendly by disposing of scrap in a professional
way.
Please neither throw away the packaging nor the used machine later on, but dispose of them
according to the guidelines established by your city council/municipality or by the corresponding
waste management enterprise.
Version 1.1.3 dated 2014-4-8 Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
BF46V | BF46TC GB
Page 103