Qualification Of Personnel; Target Group - Optimum OPTImill BF 46TC Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y

be duly qualified,

strictly follow these operating instructions.
Always disconnect the drilling-milling machine from the electrical power supply when perform-
ing cleaning or maintenance works.
WARNING!
The drilling-milling machine may only be used with functional safety devices.
Disconnect the drilling-milling machine immediately, whenever you detect a failure in the
safety devices or when they are not fitted!
All additional devices installed by the operator have to be equipped with the prescribed
safety devices.
This is your responsibility being the operating company!

"Safety devices" on page 63
1.5

Qualification of personnel

1.5.1 Target group

This manual is addressed to

the operating companies,

the users,

the staff for maintenance works.
Therefore, the warning notes refer to both, operation and maintenance staff of the drilling-mill-
ing machine.
Disconnect the drilling-milling machine always from the electrical power supply. This will pre-
vent it from being used by unauthorized staff.
The qualifications of the staff for the different tasks are mentioned below:
Operator
The operator is instructed by the operating company about the assigned tasks and possible
risks in case of improper behaviour. Any tasks which need to be performed beyond the opera-
tion in the standard mode must only be performed by the operator if it is indicated in these
instructions and if the operating company expressively commissioned the operator.
Electrical specialist
Due to his professional training, knowledge and experience as well as his knowledge of respec-
tive standards and regulations the electrical specialist is able to perform works on the electrical
system and to recognise and avoid any possible dangers himself.
The electrical specialist is specially trained for the working environment in which he is working
and knows the relevant standards and regulations.
Specialist staff
Due to their professional training, knowledge and experience as well as their knowledge of rele-
vant regulations the specialist staff is able to perform the assigned tasks and to recognise and
avoid any possible dangers themselves.
Instructed persons
Instructed persons were instructed by the operating company about the assigned tasks and any
possible risks in case of improper behaviour.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must
GB BF46V | BF46TC
Page 62 Original operating instructions Version 1.1.3 dated 2014-4-8