Unpacking And Connecting; Scope Of Delivery; Transport - Optimum OPTImill BF 46TC Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y
3

Unpacking and connecting

INFORMATION
The drilling-milling machine is delivered pre-assembled.
3.1

Scope of delivery

Check immediately upon delivery of the drilling-milling machine if there are any transport dam-
ages or loosened fastening screws.
Compare the scope of delivery with the packing list.
3.2

Transport


Centres of gravity

Load suspension points
(Marking of the positions for the
load suspension gear)

Prescribed transportation position
(Marking of the top surface)

Means of transport to be used

Weights
WARNING!
Severe or fatal injuries may occur if parts of the machine tumble or fall down from the
forklift truck or from the transport vehicle. Follow the instructions and information on
the transport case.
WARNING!
The use of unstable lifting and load suspension gear that might break under load can
cause severe injuries or even death. Check that the lifting and load suspension gear has
sufficient load capacity and that it is in perfect condition.
Observe the accident prevention regulations issued by your Employers Liability
Insurance Association or other competent supervisory authority, responsible for your
company.
Fasten the loads properly.
Never walk under suspended loads!
GB BF46V | BF46TC
Page 70 Original operating instructions Version 1.1.3 dated 2014-4-8