Intended Use - Optimum OPTImill BF 46TC Betriebsanleitung

Use protective glasses!
Use ear protection!
1.2

Intended use

WARNING!
In the event of improper use, the drilling-milling machine

will endanger personnel,

the drilling-milling machine and other material property of the operating company
will be endangered,

the correct function of the drilling-milling machine may be affected.
The drilling-milling machine is designed and manufactured to be used for milling and drilling
cold metals or other non-flammable materials or materials that do not constitute a health hazard
by using commercial milling and drilling tools.
The drilling-milling machine must only be installed and operated in a dry and well-ventilated
place.
If the drilling-milling machine is used in any way other than described above, modified without
the approval of the company Optimum Maschinen Germany GmbH then the drilling-milling
machine is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH. It is also part of intended use that

the limits of the drilling-milling machine are observed ,

the operating manual is observed,

the inspection and maintenance instructions are observed.

"Technical data" on page 68
WARNING!
Heaviest injuries through improper use.
It is forbidden to make any modifications or alternations to the operation values of the
drilling-milling machine. They could endanger the staff and cause damage to the drilling-
milling machine.
INFORMATION
The drilling-milling machine BF46V | BF46TC is built according to the standard DIN EN 55011
class A.
WARNING!
The class A (machine tools) is not intended to be used in residential facilities, where the
power is supplied via a public low voltage supply system. In these areas it may possibly
be difficult to guarantee electromagnetic compatibility due to lead bound as well as
emitted interferences.
Version 1.1.3 dated 2014-4-8
Use protective gloves!
Only switch in standstill!
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Use protective boots!
Protect the environment!
Use protective suit!
Contact address
BF46V | BF46TC GB
Page 59