Operator Positions; Safety Measures During Operation; Safety Devices - Optimum OPTImill BF 46TC Betriebsanleitung


be duly qualified,

strictly follow these operating instructions.
In the event of improper use

there may be a risk to the staff,

there may be a risk to the drilling-milling machine and other material values,

the correct function of the drilling-milling machine may be affected.
1.6

Operator positions

The operator's position is in front of the
drilling-milling machine.
1.7

Safety measures during operation

CAUTION!
Risk due to inhaling of health hazardous dusts and mist.
Dependent on the material which need to be processed and the used auxiliaries dusts
and mist may be caused which might impair you health.
Make sure that the generated health hazardous dusts and mist are safely sucked off at
the point of origin and is dissipated or filtered from the working area. To do so, use a
suitable extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Before processing inflammable materials (e.g. aluminium, magnesium) or using inflam-
mable auxiliary materials (e.g. spirit) it is necessary to take additional preventive meas-
ures in order to safely avoid health risks.
1.8

Safety devices

Use the drilling-milling machine only with properly functioning safety devices.
Stop the drilling-milling machine immediately if there is a failure on the safety device or if it is
not functioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the drilling-milling machine must only be
used if you

have removed the cause of the failure,

have verified that there is no danger resulting for the staff or objects.
Version 1.1.3 dated 2014-4-8
Img.1-1:
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Operator positions
BF46V | BF46TC GB
Page 63