Ec Declaration Of Conformity - Optimum OPTImill BF 46TC Betriebsanleitung

EC - Declaration of Conformity
Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer /
retailer:
hereby declares that the following product,
Type of machine:
Type designation:
Serial number:
Year of manufacture:
Manual geared drill with with frequency converter for speed control for private persons as well as for craft
and industrial plants which meets all the relevant provisions of the above mentioned Directive 2006/42/EC
as well as the other directives applied (below) including their amendments in force at the time of declara-
tion. The following other EU Directives have been applied: EMC Directive 2014/30/EC, Low Voltage Direc-
tive 2006/95/EC
The safety objective meet the requirement of EC Directive 2006/95/EC
The following harmonized standards were applied:
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for
design and selection
EN 61800-5-1 Adjustable speed electrical power drive systems 2008-04 + correction 2
EN 61800-3:2012-09 Adjustable speed electrical power drive systems + correction 1
EN 13128:2001+A2:2009/AC:2010 Safety of machine tools - Milling machines (including boring machines)
EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
EN 60204-1:2006/AC: 2010 Safety of machinery - Electrical equipment of machines - Part 1: General
requirements (IEC 60204-1:2005 (modified))
EN 61000-6-2:2005/AC:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immu-
nity for industrial environments (IEC 61000-6-2:2005)
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission stand-
ard for industrial environments (IEC 61000-6-4:2006)
DIN EN 55011 class A: 2003-08 Industrial, scientific radio-frequency equipment
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduc-
tion (ISO 12100:2010)
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by
upper and lower limbs
Responsible for documentation: Kilian Stürmer, phone: +49 (0) 951 96555 - 800
Address:
Kilian Stürmer
(CEO, General manager)
Version 1.1.3 2014-4-8
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D- 96103 Hallstadt
Drilling-milling machine
BF46V ; BF46TC
_ __ __ __ __
20__
Dr.-Robert-Pfleger-Str.26D - 96103 Hallstadt
Hallstadt, 2014-04-07
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
BF46V | BF46TC GB
107