Intended Use - Optimum OPTidrill DH 40CT Betriebsanleitung

Switching on forbidden!
Wear protective glasses!
1.3

Intended use

WARNING!
In the event of improper use, the drilling and milling machine

will endanger personnel,

will endanger the machine and other material property of the operating company,
the functionality of the drilling and milling machine may be compromised.
The drilling and milling machine is designed and manufactured for holes in cold metals or other
non flammable materials or that not constitute a health hazard using a rotating filing-stripping
tool that has a number of grooves for collecting the filings.
If the drilling milling machine is used in any way other than described above, modified without
the approval of the company Optimum Maschinen Germany GmbH then the drilling milling
machine is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee will expire, if any constructive, technical or proce-
dural changes are not performed by the company Optimum Maschinen Germany GmbH.
It is also part of the intended use that you

observe the limits of the drilling milling machine,

the operating manual is observed,

the inspection and maintenance instructions are observed.

Technical specification on page 66
WARNING!
Extremely severe injuries.
It is forbidden to make any modifications or alternations to the operation values of the
drilling milling machine. They endanger people and can damage the drilling and milling
machine.
Safety
Version 1.0.1 - 2021-07-06
Use ear protection!
Wear protective gloves!
Translation of original instruction
Pull out the mains plug!
Read the operating
instructions before
commissioning!
Wear safety shoes! Wear a protective suit!
DH 40CT EN
57