Inhaltsverzeichnis
Werbung
Switching on forbidden!
Wear protective glasses!
Use ear protection!
1.3
Intended use
WARNING!
In the event of improper use of the drilling- milling machine
will endanger personnel,
the drilling- milling machine and other material property of the operating company
will be endangered,
the correct function of the drilling- milling machine may be affected.
The drilling- milling machine is designed and manufactured to be used for milling and drilling
cold metals or other non-flammable materials or materials that do not constitute a health hazard
by using commercial milling and drilling tools.
The drilling- milling machine must only be installed and operated in a dry and well-ventilated
place.
If the drilling- milling machine is used in any way other than described above, modified without
the approval of the company Optimum Maschinen Germany GmbH then the CNC machine is
being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We explicitly point out that any construction, technical or process engineering changes that
have not been approved by Optimum Maschinen Germany GmbH will render the warranty null
and void.
It is also part of the intended use that you
observe the limits of the drilling- milling machine,
the operating manual is observed,
the inspection and maintenance instructions are observed.
Technical specification on page 60
WARNING!
Severe injuries due to non-intended use.
EN
MB4
50
Wear protective gloves!
Only switch during
standstill!
Translation of original instruction
Read the operating
instructions before
commissioning!
Wear safety shoes!
Protect the environment!
Pull out the mains plug!
Wear a protective suit!
Contact address
Version 1.0.1 - 2021-11-18
Werbung
Inhaltsverzeichnis
